Directories staff

Photo

Position

Senior Lecturer

Name

Ir Dr Mohamed Mubarak bin Abdul Wahab

Nationality

Malaysia

mubarakwahab@utp.edu.my

Department

Civil & Environmental Engineering

Qualifications

2017, PhD in Civil Engineering by Universiti Teknologi PETRONAS

2006, Master in Engineering (Structures) by University of Melbourne, Australia

2000, Degree in Engineering (Hons.) (Civil) by Universiti Teknologi Malaysia, Malaysia.

Specialization

Structural Engineering
- civil and structural (C&S) engineering, structural reliability & integrity

Research

Condition Assessment of Aged Ships and Offshore Structures

Condition Assessment of Aged Ships and Offshore Structures Phase II

Study on the effect of probabilistic variables on the reliability of Aging offshore jacket platforms

Preliminary Investigation of Mechanical and Metallurgical Properties of Locally Intensified Welded Joints by Weld on Weld Approach

Regular and Random Waves Motion Response for Spar Deepwater Platforms

Wave Motion Responses for Spar Deepwater Platforms

Subsurface Flow Constructed Wetlands as the Tertiary Treatment for Storm Water Runoff Containing Treated Domestic Wastewater Effluent

Dynamic Wheeler

Polishing Treated Domestic Wastewater Effluent in Tropical Climate by Subsurface Flow Constructed Wetland (SSFCW)

Investigations on The Behaviour of Spar Deep Water Platforms

Wave Tank Model Tests for The Determination of Accurate Hydrodynamic Coefficients for Malaysian Offshore Locations

Non-Linear Regression Analysis for The Structural Integrity Assessment of Malaysian Jacket Platforms

Float-over Installation Method for Typical Malaysian Location

Natural Disaster Relief Structure for Humanitarian Aid in Seismic Prone Areas

Development of a Database System of Carbon Footprint for Malaysian Construction Industry

Investigation into The Higher Order Effects in The Loading of Fixed Offshore Structures

Development of Innovative Textile Reinforced-High Performance Cementitious Composites (TR-HPCC) for Enhancement of Corrosion-Damaged Offshore Platforms

Academic Buildings Structural Canopy Inspection

Investigating the effectiveness of BIM on mitigating the violation of safety rules in a safety management model

Investigation on metocean interaction behavior model with offshore structures near the free surface

Maintenance, Repair and Modification of offshore platforms

Mechanism for design for decommissioning

Health monitoring for smart infrastructure

Subsurface investigation using multichannel analysis surface wave method (MASW) at Lawas, Sarawak

Work Instruction Manual for Offshore Structural Drawing

Prediction of Structural Health Monitoring of Floating Offshore Platform Mooring Lines

Publications
No.	Title of Publication
1	Dynamic Responses of Spar Platform subjected to Waves and Currents
2	Evaluation of Pollutant Removal Efficiency of Vegetated Swale System
3	The Effectiveness of Vegetative Swale on Surface Runoff at construction sites
4	Comparative Study on Behavior of Self Compacting Concrete under Static Load at Different Loading Rates
5	Comparative Study on Behavior of Self Compacting Concrete under Dynamic Load at Different Loading Rates
6	Diffraction Method for Spar Platforms
7	Responses of Classic Spar by Morison Equation and Diffraction Theory
8	Effect of Mooring Line Damage on the Response of Truss Spar Platforms
9	Experimental and Analytical Investigation for the Responses of Semi-Submersible Platforms
10	Polishing the Treated Domestic Wastewater Effluent in Tropical Climate by Subsurface Flow Constructed Wetland
11	System Reliability Assessment on Existing Jacket Platforms in Malaysian Waters
12	Component Reliability Assessment of Offshore Jacket Structures
13	Multivariate Regression Analysis for Screening Process of Reliability Assessment
14	Reliability Assessment Model for Aging Jacket Structures in Malaysian Waters
15	System Reliability of Existing Jacket Platform in Malaysian Water (Failure Path and System Reliability Index)
16	Reliability of Jacket Platforms in Malaysian Waters- Pushover and Regression Analysis Methods in Obtaining Reserve Strength Ratio
17	Reliability of Jacket Platforms in Malaysian Waters- Sensitivity Study Using Pushover Analysis
18	Pushover Analysis for Jacket Platforms - Sensitivity Study and Safety Ratios
19	Multivariate Regression Analysis for Screening Process of Reliability Assessment
20	Component Reliability Prediction Model for Malaysia Offshore Regions
21	Met-ocean Study for Reliability of Jacket Platform
22	Reliability Assessment Model for Aging Jacket Structures in Malaysian Waters
23	System Reliability of Existing Jacket Platform in Malaysian Water (Failure Path and System Reliability Index)
24	Estimation of Aging Effects of Piles in Malaysian Offshore Locations
25	Changes in the Pushover Analysis Results of Offshore Jacket Platforms due to the Incorporation of the Aging Effect of Piles
26	Estimation of Aging Effects of Piles in Malaysian Offshore Locations
27	Changes in the Pushover Analysis Results of Offshore Jacket Platforms due to the Incorporation of the Aging Effect of Piles
28	Extreme Environmental Load Models For Wave and Current Response Surface Method
29	Structural Reliability Analysis Using Quadratic Polynomial Response Surface and Finite Element in MATLAB
30	Utilization of EAFD in Concrete Composite
31	Incremental Wave Analysis Method: An alternative to Load Factor Method in SACS Pushover analysis
32	Design of Bamboo Reinforced Concrete Beam: A Sustainable Approach (under progress)
33	Component, Joint and System Based Environmental Load Factor for Jacket Platforms in Malaysia
34	Assessment of code compliance of proximity welds and weld on weld practice in offshore steel structures
35	Physical modelling of lateral soil displacement and pipeline movement due to landslide
36	Below-grade sulfur storage pits in oil refineries: a review
37	Enhanced properties of cementitious composite tailored with graphene oxide nanomaterial – a review
38	Strength behavior of concrete by partial replacement of fine aggregate with ceramic powder
39	Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology
40	Mechanical and microstructural properties of high calcium fly ash one-part geopolymer cement made with granular activator

Working Experience
No.	Position	From - To (Year)	Company Name
1	Engineer	2000 - 2005	Produktif Prestasi SB
2	ASSOCIATE	2005 - PRESENT	PERUNDING AZIZI

Membership
No.	Position	From - To (Year)	Professional Bodies / Association
1	Member	2010 - present	Board of Engineers Malaysia
2	Corparate Member	2000 - present	Institution of Engineers Malaysia
3	Associate Member	2012 - 2016	American Society of Civil Engineers
4	Council Member (Term 2013-2015)	1999 - present	Malaysian Structural Steel Association
5	Corporate Member	2012 - 2050	Concrete Society of Malaysia (CSM)
6	Secretary	2015 - present	MyGeopolymer
7	MEMBER	2019 - 2020	AMERICAN CONCRETE INSTITUTE

Research
No.	Level of involvement	Research Title
1	Leader	Condition Assessment of Aged Ships and Offshore Structures
2	Leader	Condition Assessment of Aged Ships and Offshore Structures Phase II
3	Leader	Study on the effect of probabilistic variables on the reliability of Aging offshore jacket platforms
4	Leader	Preliminary Investigation of Mechanical and Metallurgical Properties of Locally Intensified Welded Joints by Weld on Weld Approach
5	Leader	Regular and Random Waves Motion Response for Spar Deepwater Platforms
6	Leader	Wave Motion Responses for Spar Deepwater Platforms
7	Leader	Subsurface Flow Constructed Wetlands as the Tertiary Treatment for Storm Water Runoff Containing Treated Domestic Wastewater Effluent
8	Leader	Dynamic Wheeler
9	Leader	Polishing Treated Domestic Wastewater Effluent in Tropical Climate by Subsurface Flow Constructed Wetland (SSFCW)
10	Leader	Investigations on The Behaviour of Spar Deep Water Platforms
11	Member	Wave Tank Model Tests for The Determination of Accurate Hydrodynamic Coefficients for Malaysian Offshore Locations
12	Member	Non-Linear Regression Analysis for The Structural Integrity Assessment of Malaysian Jacket Platforms
13	Member	Float-over Installation Method for Typical Malaysian Location
14	Member	Natural Disaster Relief Structure for Humanitarian Aid in Seismic Prone Areas
15	Member	Development of a Database System of Carbon Footprint for Malaysian Construction Industry
16	Member	Investigation into The Higher Order Effects in The Loading of Fixed Offshore Structures
17	Member	Development of Innovative Textile Reinforced-High Performance Cementitious Composites (TR-HPCC) for Enhancement of Corrosion-Damaged Offshore Platforms
18	Leader	Academic Buildings Structural Canopy Inspection
19	Member	Investigating the effectiveness of BIM on mitigating the violation of safety rules in a safety management model
20	Member	Investigation on metocean interaction behavior model with offshore structures near the free surface
21	Leader	Maintenance, Repair and Modification of offshore platforms
22	Member	Mechanism for design for decommissioning
23	Leader	Health monitoring for smart infrastructure
24	Leader	Subsurface investigation using multichannel analysis surface wave method (MASW) at Lawas, Sarawak
25	Leader	Work Instruction Manual for Offshore Structural Drawing
26	Leader	Prediction of Structural Health Monitoring of Floating Offshore Platform Mooring Lines

Recognition
No.	Recognition Title	From - To (Year)	Organizer / Bodies
1	Panel Evaluator for Engineering Accreditation Council (EAC), Board of Engineers Malaysia (BEM)	2018 -	Engineering Accreditation Council (EAC)