Directories staff

Photo

Position

Senior Lecturer

Name

Ts Dr Azlan bin Ahmad

Nationality

Malaysia

azlan.ahmad@utp.edu.my

Department

Integrated Engineering

Qualifications

2011, Diploma in Mechanical Engineering with Education by Universiti Tun Hussein Onn Malaysia

2014, Degree in Mechanical Engineering by Universiti Tun Hussein Onn Malaysia

2017, PhD in Mechanical Engineering by Universiti Tun Hussein Onn Malaysia

Specialization

Manufacturing, Aluminium Recycling, Metal Forming, Hot Press Forging, Design of Experiment.

Research

Biocompatibility augmentation investigation for Ti-6Al-7Nb through severe plastic deformation process as an alternative artificial implant material

Mechanical Properties and Sustainability Studies of Recycled Aluminium for Surgical Tools Application

Thermal and Surface Integrity Study of Bioresorbable AZ31C Magnesium Alloy Influenced by Cryogenic and Dry Turning

Fundamental Study on Damage Mechanism Model and Energy Dissipation of Type IV Hybrid Composite PVs Subjected to Impact Load

Effects of the Operating Temperature and Operating Time in Direct Recycling Hot Press Forging of Aluminium Aircraft Component (AA7075)

Publications
No.	Title of Publication
1	Hot press forging as the direct recycling technique of aluminium- A review
2	Weld strength in solid–state recycling of aluminum chips: Schweißnahtfestigkeit im Festkörper-Recycling von Aluminium-Spänen
3	Mechanical properties of recycled aluminium chip reinforced with alumina (Al2 O3 ) particle: Mechanische Eigenschaften von mit Aluminiumoxid (Al2 O3 ) verstärkten recycelten Aluminiumspänen
4	Hot press as a sustainable direct recycling technique of aluminium: Mechanical properties and surface integrity
5	On the role of processing parameters in Producing recycled aluminum AA6061 based metal matrix composite (MMC-AlR) prepared using hot press forging (HPF) process
6	Parametric optimisation of heat treated recycling aluminium (AA6061) by response surface methodology
7	Integrating simulation with experiment for recycled metal matrix composite (MMC-AlR ) developed through hot press forging
8	Life Cycle Assessment on the Effects of Parameter Setting in Direct Recycling Hot Press Forging of Aluminum
9	Conjectured the behaviour of a recycled metal matrix composite (MMC-AlR ) developed through hot press forging by means of 3D FEM simulation
10	Effect of unit cell type and pore size on porosity and mechanical behavior of additively manufactured Ti6Al4V scaffolds
11	https://pubmed.ncbi.nlm.nih.gov/31197092/
12	Statistical Optimization by the Response Surface Methodology of Direct Recycled Aluminum-Alumina Metal Matrix Composite (MMC-AlR) Employing the Metal Forming Process
13	Novel hydroxyapatite-based bio-ceramic hollow fiber membrane derived from waste cow bone for textile wastewater treatment
14	Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review
15	Electroless Ni-P-TiO2 (ENPT) Composite Coating: A Review on Microstructural Characteristics and Multifarious Properties for Surgical Instruments

Working Experience
No.	Position	From - To (Year)	Company Name
1	Lecturer	2018 - Present	Universiti Teknologi PETRONAS

Membership
No.	Position	From - To (Year)	Professional Bodies / Association
1	Graduate Members	2015 - Present	Board of Engineers Malaysia (BEM)
2	Graduate Members	2014 - Present	Institution of Engineers, Malaysia (IEM)
3	Members	2018 - Present	International Association of Engineers (IAENG)
4	Professional Technologist	2020 - Present	Malaysia Board of Technologies

Research
No.	Level of involvement	Research Title
1	Member	Biocompatibility augmentation investigation for Ti-6Al-7Nb through severe plastic deformation process as an alternative artificial implant material
2	Leader	Mechanical Properties and Sustainability Studies of Recycled Aluminium for Surgical Tools Application
3	Leader	Thermal and Surface Integrity Study of Bioresorbable AZ31C Magnesium Alloy Influenced by Cryogenic and Dry Turning
4	Member	Fundamental Study on Damage Mechanism Model and Energy Dissipation of Type IV Hybrid Composite PVs Subjected to Impact Load
5	Member	Effects of the Operating Temperature and Operating Time in Direct Recycling Hot Press Forging of Aluminium Aircraft Component (AA7075)

Recognition
No.	Recognition Title	From - To (Year)	Organizer / Bodies
1	Gold Medal - ITEX 2018	2018 -	International Invention, Innovation and Technology Exhibition
2	Grand Prize SIIF 2018	2018 -	Seoul International Invention Fair