Sign In
Lecturer Search
Photo
Position
Associate Professor
Name
Assoc Prof Ir Dr Hamdan bin Ya
Nationality
Malaysia
Email
hamdan.ya@utp.edu.my
Department
Mechanical Engineering
Qualifications

1988, Diploma in Mechanical Engineering by Institut Teknologi Mara

1992, Degree in Mechanical Engineering (B. Eng. Hons) by Institut Teknologi Mara

2007, PhD in Impact Engineering on Composite Pipe (Applied Mechanics) by The University of Manchester

Specialization
  1. ​PAN Co-polymer reactor, Bio Reactor Design and Presssure Vessel Design

    • Design and setup Bio or Co-polymer reactors
  2. Impact Engineering on Type IV Pressure Vessel
  3. Erosion on L-bow joint due to sub-micron particle in multi-phase flow
  4. Impact engineering on FRP composite materials
  5. Bio-plastic reactor
Research

​EFFECT OF FIBER TOW ARRANGEMENT OF CARBON FIBER REINFORCED COMPOSITE PIPE ON MECHANICAL PROPERTIES FOR OFFSHORE PIPELINE APPLICATION​

Submicron Particle Impact of Wet Flow Process On Carbon Steel Pipe

Local Proprietary Formulation of Polyacrylonitrile for Carbon Fibre Lightweight Tanks 

MODELLING OF MAGNETO-HYDRODYNAMIC SLIDER AND JOURNAL BEARINGS WITH PARTIALLY TEXTURED SLIP SURFACE LURICATED WITH NON-NEWTONIAN FLUIDS: INVESTIGATION OF STABILITY IMPROVEMENT OF MULTI-LOBE BEARINGS

​New Fabrication Technique of Non-Metallic Hybrid Composite Pipe for oil and Gas Application

Energy Dissipation Model on Layered Fibres Winding of Type IV Hybrid Composite Pressure Vessel Subjected To Impact Load

Sub micron particle impact of wet flow process on carbon steel pipe

Publications
No.Title of Publication
1http://download-v2.springer.com/static/pdf/893/art%253A10.1007%252Fs11743-014-1603-4.pdf?token2=exp=1428293736~acl=%2Fstatic%2Fpdf
2https://www.jstage.jst.go.jp/article/jos/63/6/63_ess13200/_pdf
3https://www.researchgate.net/publication/262341824_Detergency_Stability_and_Particle_Characterization_of_Phosphate-Free_Spray_Dried_Detergent_Powders_Incorporated_with_Palm_C16_Methyl_Ester_Sulfonate_C16MES
4http://link.springer.com/article/10.1007/s11743-014-1603-4#/page-1
5Effect of surface texturing on hydrodynamic performance of journal ARPN Journal of Engineering and Applied Sciences VOL. 11, NO. 1, JANUARY 2016 ISSN 1819-6608
6S. Hamdavi,T. V. V. L. N. Rao,M. Muhammad, K. M. Faez,H. H. Ya Linear stability analysis of short journal bearing with an axial groove Lineare Stabilitätsanalyse von Kurzgleitlagern mit einer axialen Nut, DOI: 10.1002/mawe.201600760
7Tahir Abbas, H.H. Ya and Mohamad Zaki Abdullah 2016 “The effect of fiber angles on energy absorption of 50% partially wrapped aluminium-composite hybrid tube under axial crushing” WILEY VCH - "Materials Science and Engineering Technology" (ISSN: 0933-5137)
8Shahab Hamdavi, Hamdan Haji Ya, Tadimalla VVLN Rao, and Ku Muhammad Faez. “An Analytical Approach to Investigate the Effect of Grooved Surface on Short Journal Bearing Performance”. ARPN Journal of Engineering and Applied Sciences, 2016. 11(20): p. 12045-49. (ISSN 1819-6608)
9Energy absorption capability of aluminium tube partially wrapped ‎with glass/epoxy subjected to quasi-static loading. http://www.arpnjournals.org/jeas/research_papers/rp_2016/jeas_1216_5541.pdf
10The effect of fiber angles on energy absorption of 50% partially wrapped aluminium-composite hybrid tube under axial crushing http://onlinelibrary.wiley.com/doi/10.1002/mawe.201600773/full
11Experimental investigation of energy absorption of ‎partially wrapped ‎thin-walled ‎aluminium-glass/epoxy ‎tube subjected to quasi-static ‎loading https://www.scientific.net/MSF.904.61
12Comparison of energy absorption of aluminium-composite tubes subjected to axial loading http://iopscience.iop.org/article/10.1088/1757-899X/205/1/012020/meta
13Effect of Sand Fines Concentration on the Erosion-Corrosion Mechanism of Carbon Steel 90 • Elbow Pipe in Slug Flow https://www.researchgate.net/publication/344679335
14Pseudo-Ductility, Morphology and Fractography Resulting from the Synergistic Effect of CaCO3 and Bentonite in HDPE Polymer Nano Composite https://www.mdpi.com/1996-1944/13/15/3333
15Influence of Sand Fines Transport Velocity on Erosion-Corrosion Phenomena of Carbon Steel 90-Degree Elbow Metals 2020, 10(5), 626; https://doi.org/10.3390/met10050626
16Erosion–Corrosion of 30°, 60°, and 90° Carbon Steel Elbows in a Multiphase Flow Containing Sand Particles Materials 2019, 12(23), 3898; https://doi.org/10.3390/ma12233898
Working Experience
No.PositionFrom - To (Year)Company Name
1Section Head2010 - 2012SIRIM Bhd
2GM2012 - 2013SIRIM Bhd
3Associate ProfessorDis 2013 - To dateUTP
Membership
No.PositionFrom - To (Year)Professional Bodies / Association
1Profesional Engineer2010 - 2020Board of Engineer Malaysia (BEM)
2Member2010 - 2020Institute of Engineer Malaysia
3MIMchE2019 - 2020CEng MIMchE
Research
No.Level of involvementResearch Title
1Leader

​EFFECT OF FIBER TOW ARRANGEMENT OF CARBON FIBER REINFORCED COMPOSITE PIPE ON MECHANICAL PROPERTIES FOR OFFSHORE PIPELINE APPLICATION​

2Leader

Submicron Particle Impact of Wet Flow Process On Carbon Steel Pipe

3Leader

Local Proprietary Formulation of Polyacrylonitrile for Carbon Fibre Lightweight Tanks 

4Member

MODELLING OF MAGNETO-HYDRODYNAMIC SLIDER AND JOURNAL BEARINGS WITH PARTIALLY TEXTURED SLIP SURFACE LURICATED WITH NON-NEWTONIAN FLUIDS: INVESTIGATION OF STABILITY IMPROVEMENT OF MULTI-LOBE BEARINGS

5Member

​New Fabrication Technique of Non-Metallic Hybrid Composite Pipe for oil and Gas Application

6Leader
Energy Dissipation Model on Layered Fibres Winding of Type IV Hybrid Composite Pressure Vessel Subjected To Impact Load
7Leader
Sub micron particle impact of wet flow process on carbon steel pipe
Recognition
No.Recognition TitleFrom - To (Year)Organizer / Bodies
1

​The International Postgraduate Network - Technical Committee​

2014 - 2016
2

​Industrial Appraiser Panel -UniTEN​

2010 - 2014UniTEN
3

​Project Management Team - MOSTI

2009 - 2016MOSTI